How to Replace a UPVC Window Handle
If the window handle of your upvc has been damaged, you could be considering replacing it. This is a straightforward task that costs between PS5 and PS10.
Start by opening your window handle to the locked/open position. Take off broken window handle from the screw. This is located above the handle, but often below it too.
Measure the Spindle length
Changing the window handle is not difficult however it is crucial to ensure that you have the correct tools and take your time. It is crucial to identify the type of uPVC handles you have and to measure the spindle to find the correct replacement.
Typically the uPVC handle is secured by an attachment screw that binds it to the window frame. You can remove this screw by using a screwdriver. However, you must be careful not to damage the locking mechanism. It is recommended to make use of an electric screwdriver in order to prevent this from occurring.
Once you have removed the screw, you are able to remove the old handle. Then, you can put in the handle and make sure that it is correctly aligned with the wedge block. It is also essential to ensure that the new handle will close securely, as this will help to guard your home from intruders.
There are a number of different types of uPVC handles that include inline Espagnolette handles as well as tilt and turn handles. These handles are used on windows that can be opened by turning them or by tilting them open for ventilation. If you are replacing a tilt and turn handle, it is important to determine the spindle's length before buying one since different handles have varying sizes of spindle.
The most efficient way to determine what type of handle you have is to look at the bottom of it. There should be a snap-in covering over an anchor screw that holds the handle's base in position. If you remove this cover, you'll be able to observe the screw that holds the cockspur handle in place.
It is easy to replace your handle once you are aware of the model you have. You are likely to find the same handle at a local hardware store or on the internet. But, it is important to remember that the handle may not be the same color as your current one and that you must be aware of the spindle's length on the replacement handle to ensure it will fit inside your window.
Remove the Old Handle
If you've noticed that the handles on your windows are beginning to loose their grip, or that they're becoming stiff to turn, then it may be time to replace them. It's a relatively simple process and can be done in just two steps. Whether your windows are uPVC or older-style you can easily put in replacement handles. There are a variety of locks and handles, therefore you must make sure you choose the appropriate one for your home.
The first step is to eliminate the handle from your window. This can be done by locating and taking off the screws at the base of the handle, then using a screwdriver to take out the screws that hold the handle in position. When removing the handle from the window, take care not to damage the frame or break the handle.
The next step is to remove the spindle bar from the back of the handle. It's usually held in place by two screws, which can be removed with the help of a screwdriver, or a pair of pliers. Once the screws have been removed, you can remove the old handle from the window frame and also the locking mechanism.
After removing the old handle, you'll need to find a new one that has the same spindle length. The right choice will ensure that it fits correctly and that your windows are secure. If you're not sure of the size handle to purchase make sure to check the handle you have to see which type it is. There are a variety of different kinds of uPVC window handles, including inline espagnolette handles, cranked espagnolette handles, and tilt and turn uPVC handles.
Inline espagnolette handles are equipped with a 7mm square spindle and can be opened either in the right or left-hand position. Tilt and turn uPVC handles share the same fixing centers, however they differ in their blade shape - bent or flat. Cockspur handles are long-nosed, and they latch onto the outer frame or transom bars' cross member. They can be replaced with cockspag wedge blocks that are available in the same sizes as regular uPVC handle screws.
Install the new Handle
Over time, uPVC window handles can become brittle or weak due to frequent use and exposure to elements. By slamming or forcing the closure of the handle can also result in strain and stress, resulting in breakage of the mechanism. There are a few simple fixes that can restore functionality to the handle.
If the problem is related to the screws that hold the handle the first step is tightening them. To tighten the screws, you can use a screwdriver. Be careful not to overtighten as this can damage the handle. It could be necessary to replace the screws too when they're damaged or stripped.
In a lot of cases, the handle breaks when it isn't properly aligned or attached to the window frame. If this is the case, then it is possible to reinstall the handle. It's a fairly simple procedure that will only take you a few moments to complete.
First, ensure the window is in an open position. Also, find any screws that secure the handle. These are usually located either above or below the handle, and are protected by plastic caps. Remove the caps and use the screwdriver to loosen either the top or bottom screws that hold the handle in place.
Once the screws are removed, you should be in a position to pull the handle away from the window mechanism. This should reveal the spindle which is a bar of metal that slots into the handle and into the window lock mechanism. The spindle will need to be replaced if it's damaged.
The next step is to replace the handle. Start by placing the handle on the window and marking the location of the screw holes with a pencil. Then, you can insert the new screws into the marked holes and tighten them with your hands at first. Tighten each screw gradually to ensure proper alignment without damaging the handle or the window frame. Test the handle to make sure it locks securely and runs smoothly.
Test the Handle
If you're trying to open or close your window, it's vital that the handle operates smoothly. If your window handles don't lock correctly or are loose they may be due to replace them. The process of replacing your upvc window is relatively straightforward and easy.
On uPVC double-glazed windows, there are many different types of window handles. These include Espag handles, Cockspur handles tilt and turn handles and blade or spade handles. Each of these handles serves distinct functions and uses, but all are designed to provide the highest levels of security.
Before you purchase a replacement handle, you'll need to identify the root of the problem. If the handle is loose, it could be due to a number of factors. In some cases it may only need to be tightened. In other cases the issue could be more serious and require expert assistance. If this is the case, contact a uPVC window expert for assistance from a professional.
Alternatively, the issue could be caused by a lack of maintenance or general wear and tear. If the handle has been often closed and opened or even more frequently, it could be a little looser than it should be. In such cases, you can usually tighten the screws that secure the handle to the window mechanism using the screwdriver.
If the issue is serious, there may be a blockage in the handle or an internal defect. The most frequent problems with uPVC window handles are internal breakages in the handle that prevent it from engaging with the spindle of the locking mechanism. If this is the case, it's recommended to speak with an expert in uPVC window design or local handyman to ensure your window is functional and safe.
After you've replaced the handle, it's a good idea test it to make sure that it functions smoothly and securely. This can be done by opening and shutting the window repeatedly to ensure it locks and opens easily. It's also a good idea to lubricate the lock mechanism and handle periodically to ensure that it operates smoothly.